All posts

Build Productivity Practice Interactions in Rise

Use three patterns from a Mighty design challenge entry to turn productivity content into practice: sorting tasks, timing focused work, and triaging distractions.

The Mighty teamMighty by Maestro
7 min read

It’s easy for productivity content to feel preachy: here are the four tips, now go be focused! A stronger Rise lesson asks learners to do the thing instead—sort work, complete a focus cycle, or decide which interruptions deserve attention.

Mighty

In a recent Mighty design challenge with Tim Slade and The eLearning Designer’s Academy, contributor Steve shared three compact interactions around organization, productivity, and focus at work. They’re useful examples because each one turns a familiar workplace habit into a small performance-based practice moment.

Here’s how to use those same patterns in your next Articulate Rise 360 course, with Mighty and Mighty Studio helping you go beyond the standard “show and tell” block.

Start with the performance, not the format#

Before you open the block library, write one sentence that starts with:

After this interaction, the learner will practice...

For Steve’s three examples, those practice goals are clear:

  • Organizing tasks into the right productivity category
  • Completing a Pomodoro-style focus cycle
  • Judging workplace notifications and deciding what to keep versus close for later

The interaction doesn’t just exist because it’s more interesting than a list. It exists because the learner needs to rehearse a decision or behavior they’ll use back at work.

Pattern 1: A drag-and-drop task organizer#

Steve’s first interaction focuses on organization. At the top, learners see four different ways to organize work. The practice activity asks them to take a task and drag it into the appropriate box.

As the learner hovers over a possible destination, the target highlights. That little bit of feedback helps them preview where the task might go before they commit.

Build the learning flow

  1. Create a Rise lesson section on organizing work.
  2. Introduce the four organizing methods before the practice moment.
  3. Keep the explanation brief—this is the setup, not the whole lesson.
  4. Add a custom interaction built in Mighty Studio for the practice activity.
  5. Place the four categories across the top or in a clear, consistent arrangement.
  6. Add one draggable task at a time, or a small set of tasks if the decision is simple.
  7. Create a drop area for each category.
  8. Add hover highlighting to each drop area so learners can see which target they are about to use.
  9. Provide feedback after the learner drops the task.
  10. Repeat the activity across the four tabs or category views, as Steve’s example does.

What to watch for

The categories need to be meaningfully different. If a task could reasonably fit in two places, either revise the task or make the feedback explain the nuance.

This is especially important for workplace productivity topics, where there often isn’t one universal “right” system. The point is to practice the thinking behind the organization method, not to force an arbitrary answer.

Why this works in Rise

Native Rise blocks are great for explaining categories, but they don’t give you this exact style of custom drag-and-drop practice. That’s where Mighty Studio is helpful: you can design the interaction around the decision you need learners to make, then place it inside the Rise lesson as part of the flow.

Use this pattern when your content includes:

  • Categorizing tasks
  • Prioritizing work
  • Matching requests to workflows
  • Sorting examples into frameworks
  • Practicing “where does this belong?” decisions

Pattern 2: A Pomodoro timer learners can actually use#

The second interaction is a Pomodoro timer. Steve’s version uses a tomato-shaped timer and speeds up the countdown for demonstration, so viewers don’t have to sit through a full work session.

The interesting part is that the same pattern could be adapted for a real focus session. You could embed something like this in a course when the learner needs to learn something, go do it, and then come back. The course can stay open in the background, and the timer can even include sounds so learners hear a bell when it’s time to return.

Build the learning flow

  1. Identify the part of the course where learners need to leave the screen and apply something.
  2. Give them a concrete task before the timer starts. For example: draft a response, review a work sample, organize a task list, or complete a short reflection.
  3. Add a Mighty Studio timer interaction after the instructions.
  4. Decide whether the timer is only a demonstration or a real timed activity.
  5. If it’s a demo, shorten or speed up the timer so learners understand the cycle without waiting.
  6. If it’s a real activity, set the duration to match the work you are asking them to do.
  7. Add a clear start state so learners know when the focus session begins.
  8. Add an end state that signals the cycle is complete.
  9. If appropriate, include a sound cue so learners can keep the course in the background and hear when time is up.
  10. Follow the timer with a prompt that brings learners back into the lesson.

Make the timer earn its place

A timer by itself can feel decorative. Be sure to tie it to a real action.

For example, instead of saying “Try the Pomodoro technique,” say:

  • “Start the timer and spend the focus period clearing one small task from your list.”
  • “Use this cycle to sort today’s work into your four organization categories.”
  • “During the timer, turn off one avoidable distraction and complete the short planning worksheet.”

That turns the block into a bridge between the course and the learner’s actual work.

Accessibility and learner control

If you use sound, don’t make it the only signal that the timer has ended. Pair it with a visible end state or message. Some learners may have sound off, use assistive technology, or be in a work environment where audio cues are not practical.

Also consider whether a timed activity could add unnecessary pressure. For a focus tool like Pomodoro, the timer is the point. For an assessment or sensitive decision-making task, timing may not be appropriate.

Pattern 3: A notification triage simulation#

Steve’s third interaction mirrors a familiar workday problem: alerts and pop-ups competing for attention. The learner sees different notifications and decides what to keep versus what to close and save for later.

This is a strong use case because it feels realistic. Most of us are not struggling because we don’t know what a distraction is. We struggle because distractions arrive mixed in with things that might actually matter.

Build the learning flow

  1. Set up the context: the learner is in a normal workday with multiple alerts appearing.
  2. Create a guided simulation in Mighty Studio with workplace-style notification prompts.
  3. For each notification, give the learner a simple choice: keep it or close it for later.
  4. Make each item specific enough to judge. Vague alerts lead to vague decisions.
  5. Sequence the notifications so learners practice evaluating them one at a time.
  6. Provide feedback that explains why an item should stay visible or be deferred.
  7. Include a final reflection: “What did you keep, and what did you close?”
  8. Connect the simulation back to a practical workplace habit, such as batching low-priority messages or protecting focus time.

Use realistic distractors

The simulation works best when the notifications are believable. Think about the actual tools and interruptions your learners deal with:

  • Calendar reminders
  • Chat messages
  • Email previews
  • System alerts
  • Project management updates
  • “Quick question” requests

You don’t need to recreate a full desktop environment. A guided sequence of focused decisions can be enough, especially inside a Rise lesson where you want the interaction to be quick and purposeful.

Choose the right pattern for the behavior#

These three examples are not just different visual treatments. They match different kinds of performance.

Use the drag-and-drop organizer when learners need to classify, sort, or prioritize.

Use the Pomodoro timer when learners need to step away from the course and complete a focused work session.

Use the notification triage simulation when learners need to make judgment calls under realistic workplace noise.

That alignment is what keeps custom interactions from becoming novelty. The format supports the behavior.

Where Mighty fits#

Rise gives you a clean lesson structure, strong default blocks, and a fast authoring workflow. Mighty and Mighty Studio help when your learning objective calls for something more custom than the native block library provides—like a drag-and-drop with hover states, a branded timer, or a guided notification simulation.

Mighty does not decide the instructional strategy for you. You still need the right performance goal, realistic scenarios, and useful feedback. But once you know what learners should practice, Mighty gives you more room to build the interaction around that behavior inside your Rise course.

A quick planning checklist#

Before you build, answer these five questions:

  1. What real workplace action is the learner practicing?
  2. What decision does the interaction ask them to make?
  3. What feedback will help them improve?
  4. Does the interaction need to be realistic, timed, sortable, or guided?
  5. What should the learner do immediately after the interaction?

If you can answer those, you’re ready to build something more useful than another content reveal.

Steve’s examples are a good reminder: a small interaction can create meaningful practice when it asks learners to do the work. Try one of these patterns the next time your Rise lesson needs less telling and more trying.

Try Mighty free for 30 days.

Install in Chrome, open your Rise course, and ship the interactives you couldn’t before. No credit card. Cancel any time.