All posts

Create Layered Image-and-Text Effects in Rise

Build an overlapped image-and-text design directly in Rise using Mighty’s Flexible Image + Text Overlap Studio template.

The Mighty teamMighty by Maestro
7 min read

Layered editorial layouts can make a Rise lesson feel far more custom—but they usually mean building a flattened graphic somewhere else and bringing it back in as an image. Mighty’s Flexible Image + Text Overlap Studio template lets you create that cut-and-paste effect directly in Rise, with real text and movable layers.

Mighty

In the video walkthrough, Maestro senior LXD Brianna Hayes showcases this Studio Spotlight build: a bold image-and-type composition inspired by a Pinterest-style layout, rebuilt without the Figma workaround.

What we’re building#

The final design uses:

  • A background gradient split behind the content
  • A portrait image in the center
  • One large text layer tucked behind the image
  • A second large text layer sitting in front of the image
  • Layer positioning controls to fine-tune the overlap

The important part is that the text stays editable inside Rise. You’re not baking meaningful words into a single image file and then trying to remember to recover that meaning with alt text later.

Start with the Flexible Image + Text Overlap template#

  1. Open your Rise course.
  2. Add a new block where you want the layout to appear.
  3. In the block library, go to Studio Templates.
  4. Search for flexible.
  5. Choose Flexible Image + Text Overlap. You’ll recognize it by the preview image with the flexible woman.

You can also find it in Studio under the Discover Library, alongside the other Mighty-built Studio templates.

Once added, the block starts with a simple base design and placeholder text, so you don’t have to build the entire layered structure from scratch.

Setting up the course background#

Before editing the image and text layers, Brianna starts by adjusting the course background so the block sits cleanly in the lesson.

  1. Select the surrounding course or lesson background area.
  2. Set the background color you want behind the block.
  3. Then open the Flexible Image + Text Overlap block settings.
  4. Remove the block’s own background color so the block can handle the visual treatment.

In the video, the goal is a split-color effect, so the block uses a gradient rather than a flat fill.

Creating a gradient split#

To create a gradient split effect:

  1. Turn off inherited colors if needed so you can choose your own colors.
  2. Choose the lower gradient color. In the demo, Brianna grabs a color from the neighboring block and uses a recent color to apply it quickly.
  3. Set Blend Amount to 0.
  4. Set the gradient Size to around 60 to start.

That 0 blend amount is what creates the crisp split instead of a soft fade.

Adding the image layer#

When you’re ready, add the image before spending too much time on text placement. It’s much easier to position the typography when you can see what it needs to overlap.

  1. Open the block’s layer controls.
  2. Go to the Image layer.
  3. Add your image.

The template includes a useful note:

A PNG image with a transparent background is best for cut-and-paste effects.

That transparency is what lets the text feel like it’s weaving behind and in front of the subject, instead of sitting on top of a rectangular photo. In the demo, Brianna considers removing the image background but keeps moving with the existing image to stay focused on the layout.

Styling the first text layer behind the image#

Here’s how to start styling the hero text:

  1. Open the first text layer.
  2. Replace the placeholder text with your hero word(s).
  3. Select your case.
  4. Select your font.
  5. Set your font size.
  6. Decide if you want the text to be bold.
  7. Choose the text color you want for the composition.

Now adjust the placement. Brianna sets her image to full width with the horizontal position set to center and the vertical position set to top.

A quick tip: Use the vertical movement control to nudge the text upward. As shown in the demo, moving negative goes up.

Don’t nudge so far that important parts of the letters disappear unintentionally. Brianna specifically watches the bottom of the A and pulls back when the text vanishes too much.

The aim is for the text to look intentionally cropped and layered—not accidentally cut off.

Adding the second text layer in front#

Next, you can create the foreground text. In the demo, this line reads colorful applications.

  1. Open the other text layer.
  2. Rename the layer so it’s easier to find later.
  3. Replace the placeholder text with your secondary text.
  4. Set the case.
  5. Set the font.
  6. Set the font size.
  7. Decide if you want the text to be bold.
  8. Choose the text color you want for the composition. Brianna uses a type/color picker from another screen to match the intended design.

Then adjust the layer so the line has enough room, moving the layer until it sits across the image where you want the overlap.

In the video, 107 ends up feeling a little too small once the text is layered against the subject’s face. Brianna increases the size to 140, which gives the phrase more presence and keeps it from crowding awkwardly around the lips.

Type size is not just about hierarchy. In an overlap layout, it also controls how the text interacts with the image contours.

Fine-tuning the overlap instead of forcing it#

At this stage, you’ll likely be close—but not done. This template is flexible because each layer can be adjusted independently, so use that instead of trying to make the first pass perfect.

Check three things:

  • Does the background land in a visually intentional place?
  • Does the back text feel embedded behind the image?
  • Does the front text overlap the image without making the subject or the words feel cramped?

In Brianna’s build, the background gradient split needed to sit lower, under the middle of the R shape in the foreground text. She returned to the Gradients settings and adjusted the Size until the split lined up with the typography.

Then she previewed the block to confirm the effect worked outside the editor.

Why this beats the old flattened-image workaround#

The original version of this design was possible, but it took extra effort: building part of the composition in Figma, exporting it, placing it into Rise, and then carefully adding alt text because actual visible text had been embedded inside the image.

That works in a pinch, but it adds friction in all the places course designers already feel pressure:

  • Last-minute copy edits require going back to the design file.
  • Brand tweaks mean re-exporting assets.
  • Accessibility checks are easier to miss because meaningful text is no longer real text in Rise.
  • Stakeholders may ask for small layout changes that are no longer small.

With the Flexible Image + Text Overlap template, the layout is built directly in Rise. The image is still an image, but the typography can remain editable as text layers in the block.

That does not mean you should ignore accessibility. You still need to write appropriate alt text for meaningful images, and you still need to check contrast where text crosses different background areas. But you’re no longer forced to flatten visible words into a graphic just to get a layered look.

A practical recipe you can reuse#

If you want to recreate the demo’s structure in a few easy clicks, use this as your starting recipe:

  1. Add Flexible Image + Text Overlap from Discover Library.
  2. Search flexible if you want to find it quickly.
  3. Remove the block background if you’re relying on the template’s gradient.
  4. Turn off inherited colors where needed.
  5. Set Blend Amount to 0 for a crisp color split.
  6. Start the gradient Size at about 60, then adjust after the layers are built.
  7. Add your image. Use a transparent PNG when you want the cleanest cut-and-paste effect.
  8. Set the back text to full width, centered horizontally, and positioned from the top.
  9. Use negative vertical movement to tuck that text upward behind the image.
  10. Set the front text to full width and center it vertically.
  11. Increase the foreground type size if the line feels too small against the image. In the demo, 140 worked better than 107.
  12. Preview the block before calling it done.

Where this works well#

This effect is especially useful for opening moments in a Rise lesson: section dividers, destination or culture modules, campaign-style course intros, or any place where you want a stronger visual hook than a standard image-and-text block.

It’s also handy when your brand system calls for large expressive type, layered photography, or editorial layouts that are hard to create with native Rise blocks alone.

The takeaway: if you’ve been flattening text into images to get overlap effects in Rise, try building the layers directly with the Flexible Image + Text Overlap Studio template instead.

Try Mighty free for 30 days.

Install in Chrome, open your Rise course, and ship the interactives you couldn’t before. No credit card. Cancel any time.